Skip to content

Timing Devices

Race Result

Overview

The following devices are supported:

  • System 5000 directly via local network (port 3601)
  • Exporter setup on local webserver in RR12

Configuration

ALGE-Timing channels are from C0 to C9, usually being C0 the start and C1 the finish. The meaning of each setting is described here.

Active

As there can be many remote devices and/or loops connected to a decoder or RR12 event file, differentiation is based on channel and loop IDs.

Key Values Example
Start Channels M<channelId>-<loopId> M3-1 for loop 1 on channel 3
Recording Channels <channelId>-<loopId> 2-1 for loop 1 on channel 2
Bib Channels <channelId>-<loopId> 5-1 for loop 1 on channel 5

Passive

Key Values Default
Start Channels M M
Recording Channels M, F M F for recording on both a trigger and a passing
Bib Channels F F

Mstands for manual input on the active extension by either a lightbeam or a push button.

Rising/falling edge cannot be used.