Skip to content

Timing Devices

ALGE-Timing

Overview

The following devices are supported:

  • ALGE-Timy in most programs, e.g. Backup or PC-Timer
  • TDC 8000/8001 by selecting ´ALGE-Timing Timy (Backup)´ as timing device

Configuration

ALGE-Timing channels are from C0 to C9, usually being C0 the start and C1 the finish. The meaning of each setting is described here.

Key Values Default
Start Channels C0-C9 C0
Recording Channels C0-C9 C1
Bib Channels C0-C9 C1
Use Rising/Falling Edge true/false false

Tip

Rising/falling edge should be enabled (checked) when expecting longer finish passings close to each other. This way the recording only stops on the last release of the light beam.